330sc's Replies | Synthetos.com

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
March 11, 2014 at 10:56 pm in reply to: tgFX/TinyG getting started (noob) #5609

330sc
Member

When I upgrade to a new version of the software I have been uninstalling the old version via windows 7-programs and features-uninstall. Is that appropriate and does anything have to be removed manually?

March 11, 2014 at 2:03 pm in reply to: tgFX/TinyG getting started (noob) #5604

330sc
Member

Thanks. Looking forward to getting home tonight and making some more progress

March 11, 2014 at 7:51 am in reply to: tgFX/TinyG getting started (noob) #5602

330sc
Member

Thanks for the primer cmc. much appreciated. I will make necessary adjustments

March 11, 2014 at 7:44 am in reply to: tgFX/TinyG getting started (noob) #5601

330sc
Member

Thanks Rodeo, I found the sweet spot. Also the tool path is there at around X0 Y0 just real small, need to see if I can zoom. We are in “beta” after all. After realizing what a huge undertaking this project is I fully expected this wouldn’t be plug and play 100%. Probably by the time my machine is running much of this will be sorted.
Riley FYI, I can send a program to TinyG directly from my CAM software (BobCad/Cam) which I thought was cool. Just no toolpath visual. I can send you an old version of my software (that I own) if you ever have the desire to check it out.

March 10, 2014 at 11:49 pm in reply to: tgFX/TinyG getting started (noob) #5595

330sc
Member

Forgot to mention, as the g-code program was running the screen was only showing the box with X,Y axis. No tool path

February 28, 2014 at 12:44 pm in reply to: Small Arc errors – TinyG/tgFX – Engraving job #5587

330sc
Member

BobCad is the Software I use to draw (CAD) with a post processor (g-code generator) to program my vertical machining centers. Basic cad cam. I can take g-code and create geometry from it. Not the main purpose of the software just a feature

February 28, 2014 at 7:54 am in reply to: Small Arc errors – TinyG/tgFX – Engraving job #5585

330sc
Member

this is what I get when I “geometry from NC (code)” with my BobCad/Cam software

http://www.rcgroups.com/forums/showthread.php?t=2056307&page=2#post27645057
bottom D looks good

February 20, 2014 at 10:55 pm in reply to: TinyG2 + gshield + Adafruit motor shield #5452

330sc
Member

V9!V9!V9!V9!(cheering)

February 20, 2014 at 10:32 pm in reply to: Odd ball stepper motor #5451

330sc
Member

Thank you Alden.
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

330sc

Forum Replies Created

Site