Roland

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: z-axis mesh correction #6868
    Roland
    Member

    Hello John,

    sorry for not replying sooner. After finally having some time to fiddle around (and update firmware, finding not-saved configuration – of course -, finding a way to get Internet access at my CNC, …) I got your tool running and am just thrilled! Exactly what I was looking for and working like a charm.

    Thank you very much,
    Roland

    in reply to: Power management and hot steppers #4353
    Roland
    Member

    Thank you for your suggestion, I will do some tests with lowered current.

    As a suggestion/feature request: How about a command to (de)activate all power management until the next command? This way I could just issue this command right after having finished milling one piece. As soon as I would issue the commands to continue with the next one, the usual settings would kick back in and reactivate it.
    My problem with the timeout solution is, that I have to change tools (graver, drills, …) while having to maintain the exact same position – 0.1mm difference could be too much already. I think this shouldn’t really be a problem with switched off steppers, but I also wouldn’t have thought I would have the problem while milling 😉

Viewing 2 posts - 1 through 2 (of 2 total)