dandumit

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: TinyG V8 No Motor Driver #8848
    dandumit
    Member

    Thank you for your support !
    Probably on some time I will make a board for my pick and place retrofit.

    I will keep you informed !

    BR,
    Daniel

    in reply to: TinyG V8 No Motor Driver #8840
    dandumit
    Member

    Hello Chris,
    Thank you for your answers and support.
    Your offer for a blank board it’s very tempting. I would try this way the solution and after that I will build my final board.
    Best regards,
    Daniel

    in reply to: Arduino Due TinyG G2 + LitePlacer #8828
    dandumit
    Member

    Hello All,
    THank you all for you replies ! ( I wonder why I didn’t received the replies !)

    unfortunately even with this command I don’t get a proper feedback :
    from LitePlacer I get :

    > {“ej”:0} 
    {"r":{"?ej?":null},"f":[1,100,9]}
    No _textBox or _maskedText For Field ?ej?
    > {"gc":"G1 F2000 X0"}
    {"r":{},"f":[1,0,20]}
    > !%
    {"sr":{"line":0,"posx":0.000,"posy":0.000,"posz":0.000,"posa":0.000,"feed":2000.00,"vel":0.00,"unit":1,"coor":1,"dist":0,"frmo":1,"momo":1,"stat":3}}
    > {"gc":"G1 F2000 X0"}
    {"r":{},"f":[1,0,20]}
    > !%
    {"sr":{"line":0,"posx":0.000,"posy":0.000,"posz":0.000,"posa":0.000,"feed":2000.00,"vel":0.00,"unit":1,"coor":1,"dist":0,"frmo":1,"momo":1,"stat":3}}
    > {“ej”:1}
    {"r":{"?ej?":null},"f":[1,100,8]}
    No _textBox or _maskedText For Field ?ej?
    {"sr":{"feed":2000.00,"momo":1,"stat":3}}

    I think that I have to build my own TinyG HW board and I will stick to Atxmega cpu but probably this path has his pitfalls as well.

    I saw on this forum a thread started by a guy that made a TinyG board without drivers. This seems to be close to what I need now (hoping that would be easier than using G2).

    BR,
    DAniel

    in reply to: TinyG V8 No Motor Driver #8817
    dandumit
    Member

    Hello Christophe,
    I am interested ! I intend to retrofit a pick and place machine.
    I want to change all driving board with a TinyG core.
    Is the design files for your board available ?
    I have started drawing on Kicad.
    Best REgards,
    DAniel

Viewing 4 posts - 1 through 4 (of 4 total)