cmcta82

Forum Replies Created

Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • Author
    Posts
  • February 16, 2015 at 3:36 pm in reply to: Tinyg2 – eShapeoko – Gaups dual y #7382
    cmcta82
    Member

    one issue resolved, i have an unscrew in the pulley of my motor 4 (second Y) so all my motors lock, now i understand what do you tell me in point 6, i will change that to ioref, thanks to the maker of Gaups shield:).

    im compiling with the new pinout, i change also the spindle enable because he have the same pin number 12

    February 16, 2015 at 10:04 am in reply to: Tinyg2 – eShapeoko – Gaups dual y #7378
    cmcta82
    Member

    ok, i think i have some problems posting images…
    3. https://www.dropbox.com/s/arvediff14vf63o/GAUPS_1.0_schematic.png?dl=0

    • This reply was modified 9 years, 7 months ago by cmcta82.
    February 16, 2015 at 10:01 am in reply to: Tinyg2 – eShapeoko – Gaups dual y #7377
    cmcta82
    Member

    Hi cmcgrath5035, I´m sorry for the lack of information:(

    I´m trying tinyg2 because i have an arduino Due at home and i went to try:)

    1. Next time i will do what you suggest, im sorry for the inconvenient you are right.

    2. My drivers are Pololu DRV8825: https://www.pololu.com/product/2133 :
    but i can´t find the current consumption.

    3. Yes it´s that one. Gaups

    4. From specification page: “Can interface directly with 3.3 V and 5 V systems”

    5. No reason, it´s just the way i have already configured with GRBL using 4 steppers, my Y motors have separate drivers.

    6. can you explain pls

    7. Ok i will but i just went to confirm first if this modification can be done.

    8. im using the branch edge-feature-076 compiled in windows 8.1.

    Thanks for your help.

    February 15, 2015 at 7:41 pm in reply to: Tinyg2 – eShapeoko – Gaups dual y #7368
    cmcta82
    Member

    gaups

    i don´t know why but the link is not working in the first post

    February 5, 2015 at 2:51 pm in reply to: Settings are lost after reboot TinyG2 #7336
    cmcta82
    Member

    hi,

    Im new in the forum but come here from a long time, im particulary interested in this subject because i have the same problem, can i use an sdshield with an microsd card to store the settings?

  • Author
    Posts
Viewing 5 posts - 16 through 20 (of 20 total)
1 2