Forum Replies Created
-
AuthorPosts
-
aspadavecchia
Memberok so I rechecked the gears and changed the $tr to 60. It seems to move 19.5mm with the command of G1 Y20 F800, so it is darn close. I really appreciate the help. Do you have any other suggestions.
MemberI just changed it to sharing I just figured out how to change it. Sorry about that, still trying to figure out how to use the Gdrive.
MemberI am home and just pulled the current settings from the tinyG. Here they are.
https://drive.google.com/file/d/0B07DBEG7oJi7SUtpcXJiNWtwWEk/view?usp=sharing
MemberMemberi may have uploaded the wrong settings. the belt is a GT3 with a 25 tooth gear. The machine is a 750X1500. X=750 and Y=1500. If i am at front left corner the X would be my horizontal axis, correct? I am going to see if i can attach a picture in another post. If i can attach the picture I am considering the Y the longest axis.
Memberit should be shared. i received the email and shared it to two people.
MemberAfter posting the last post I played around with a few settings at a time and found something that worked as far as allowing the small movements. All of the settings in the link are the same except the following.
$xjm=50
$xjh=100
$yjm=50
$yjh=100Now that it moves I brought the spindle back to the bottom left what everyone considers “zero” and reset tinyG there. When I put in a command there like G1 Y0.5 F100 it moves a total of 1 inch on a caliper. Now with that said I have the machine set to mm.
Memberok, so I put in all the settings and confirmed them multiple times. After putting the settings in the machine will not move when I put in the G0 X20 or the G0 X20 F800 command. I am able to move it will universal gcode sender which is how I move it with my arrow keys but it is very “jerky”. I feel like we are getting closer though. By the way I will be getting limit switches but in the meantime just trying to get the machine up and running. Here are the new settings, I hope this is the text that you wanted.
MemberAs far as put in a command to make it runaway I put in a simple object in there to cut out which by what you are telling me sounds like it may not have been the best idea. I will do all of this and see what happens.
MemberDo you think this will fix my run away issue. I will be putting these in as soon as I get home from work. I really appreciate your help. Thank God for this forum.
Memberok so I changed all of the settings that you suggested. My gears are 25 teeth with G3 belts, so that would put me at $tr=75. when I changed that the machine just moves very slow but still wants to continue moving. I looked at the link that you sent in the last response, from that link I change my travel min and max for the X and Y axes. I am still at a loss.
Here are the newest settings:
https://onedrive.live.com/redir?resid=9DA5250AA8FEA235!107&authkey=!ANtH_pVC2mN79pM&ithint=file%2crtfI hope this link works this is something new for me as well.
MemberIS THE $tr=60 OR $tr=1.25. OR IS THAT FOR DIFFERENT AXES.
LIKE:
X= $tr=60, Y= $tr=60, Z= $tr-1.25MemberThank you. I will try these settings out tonight when I get home from work. Currently I use coolterm to program the board and universal gcode sender to run the gcode. As far as the z axis screw I am unsure of the pitch of that. I bough this setup in a kit except I expanded the the Y axis to 1500mm. I am using the Nema 23’s on all axes, GT3’s and 20 tooth pulleys. I appreciate the help and i will let you now. I am unsure how to put my settings into a cloud drive.
-
AuthorPosts
