TinyG for Android page 4

Hi Mac,

I'm in the middle of another project right now, but I may have time to look at the crash stuff and the easier changes this week. If you send me a private note at [email redacted], I'll send you a test apk.
-Matt

Just a quick update for everyone. New version has been out on Google Play for about a week, major fixes and improvements since the last release. I need to put together a new demo video soon. In the meantime, try out the app and let me know what you think.
Thanks,
-Matt

Hi,

First of all, thanks for a great projekt(even if mine isnt working right now .. )

facts about my CNC setup
- eShapeoko CNC, nema 23 motors
- TinyG v.7, fb 380.05, fv 0.960

Facts Andoid setup
- Motorola Xoom mz601 EU 3G
- Android 4.0.4 original, Rooted
- Latest Android CNC from playstore.

My problem is that It connects to my tinyG but then I cant send any data to it, if I connect with the FTDI UART Terminal app and push reset on the tinyG I can see the boot text(version etc) but it do not reacts on any commands I send to it.

If I use a terminal client on the Android tablet I can see in the messagelog when I connect the USB device(tinyG) so it seems to work, and none of the apps complains on the connection to the tinyG(if I disconnect the usb cable and try to connect with the tinyg Console app, I gett an error message that it cant find any tinyG device so it seems to like the connection...)

Any sugestions?
Do the app expects any special setings on the tinyG that I may have changed?

Would love to control my eShapeoko with the app and not have to cary my computer with me inte the garage :)

Okey, I have got it to work altough in a limited way :)
It is quiate buggy to connect talk to my tablet, sometimes it works and ~60% of the times it do not work to connect ...

Now to a real question, are there a file size limit in this software? I am trying to read a ~1MB large gcode file produced in cambam and it starts to open the file and then goes black and hangs(can still see the android menues).

Would be super fun if I could get the connection stable and the possibility to load large gcode files so I can start producing som real work :)

Edit1: I have also tried to load a 350kB file, same results, anyone that have managed to load a cambam file or a makercam file?

Matt,
You still around? Does this app work on the newer versions of tinyg firmware..
I tried it on 412.01 and it said connected but nothing really happens.. No status/no polling of tinyg configurations,etc..

Hey folks. A new job means that I'm not really active with this app anymore. That said, I would like to keep it functioning or possibly find someone else who is willing to maintain it.

I just tested 412.01 and the last version of the app from the google play store and it's working fine for me on an ASUS Transformer TF300T running 4.2.1. If you are having problems, please email me at [email redacted] with your tablet type, OS version, and the app debug log along with a description of the problem. Debugging can be enabled under "Settings" and generates a "tinyg-###.txt" file on your tablet's storage.

If I can reproduce the problem I will update the code, but if anyone is interested in taking over and making enhancements, let me know.

Matt

GDay Gang,
I have had some success with getting my TinyG to run some code. I have loaded Android for PC on a old laptop and installed the TinyG app. It works well with little setup. My issue now is I do some text in inkscape and create the gcode in PyCam. When I load the Gcode into the TinyG app it will not start to run the code. To get it to run I delete the setup lines at the beginning of the file. eg:
;PYCAM-META-DATA: Filename: /home/dennis/CNC/InkScapeFiles/Welcome.svg
;PYCAM-META-DATA: Timestamp: 2015-02-27 14:34:12.211458
;PYCAM-META-DATA: Version: 0.5.1
;Estimated machine time: 26 minutes
;PYCAM_TOOLPATH_SETTINGS: START
;[Bounds]
;maxz = 0.0
;maxx = 295.88434
;maxy = 148.45884
;minx = -12.86374
;miny = 72.51676
;minz = 0.0
;
;[Tool]
;torus_radius = 0.25
;speed = 1000.0
;shape = SphericalCutter
;tool_radius = 0.5
;feedrate = 200.0
;
;[Process]
;engrave_offset = 0.0
;step_down = 1.0
;generator = EngraveCutter
;postprocessor = SimpleCutter
;overlap_percent = 0
;milling_style = conventional
;material_allowance = 0.0
;pocketing_type = none
;path_direction = x
;
;PYCAM_TOOLPATH_SETTINGS: END

Once I delete the above the app runs the code.
Is there formatting in there that is upsetting the start process?

Cheers
Dennis

Hi everyone. I'm resurfacing after a long gap with some renewed interest in TinyG and this app. I'm in the process of retrofitting one of the Chinese 40/60W laser cutters with TinyG. So far I've got most of the basics worked out, and just need to get an optoisolator set up to control the laser itself from the spindle controls.

In any event, I'm probably going to brush off the code for this app, and wanted to get some feedback on if it's still of use, what problems people are facing, etc. I know we had some challenges about how to effectively buffer the input to the TinyG, and with changes in hardware on both Android and TinyG there were some issues with connectivity.

Matt

Matt,
Sorry I can't help..
I gave up on tinyg and moved on to other software/hardware and haven't looked back as it did everything I needed, just plain worked right out of the box and hasn't skipped a beat in 2 years running a few hours a day..