I have a TinyG V8 board that we have had for a few weeks. I went to add a Z-axis motor and one of the terminal block screws seems to be stripped out, it will not tighten onto the wire and the screw just spins. Does someone know the manufacturer/part number or source for the 2 pin screw terminal block motor connector so that I can replace the connector? It appears that the 4 position motor connector is two 2-position connectors side-by-side. Thanks for any information that can be provided!
Source for motor connector for V8 board
From the original Synthetos forum (2011–2025)
It’s all in the BOM on the github.
Thanks for the reply. I have looked in the TinyG GitHub and see the schematics for V8, but cannot find the BOM anywhere. Do you have a link or location where the BOM is? Sorry I am having problems navigating to it!
These look to me to be what you need
https://www.amazon.com/uxcell-Screw-Terminal-Block-Connector/dp/B013FJNYGY/ref=sr_1_1?keywords=4mm+pitch+pcb+connector+4+terminals&qid=1555601201&s=hi&sr=1-1
Probably Ebay too
This topic is from the original forum (April 2019). Your reply starts a new discussion linked to it.
Back to TinyG Support or latest activity.