From the original Synthetos forum (2011–2025)
Hello,
I am trying to connect to TinyG for the first time from my mac using CoolTerm.
I can see it connect, but I get no response in CoolTerm. RX light does blink every time I send a command through CoolTerm.
I saw previous post that suggested to reflash the firmware, which I did successfully, but still no reply from tinyg.
Board is powered by 24V power supply. When powered, D2, PWM and Mot1,2,3 are on.
Any other ideas? Any help is appreciated.
Thanks,
Mick
got it working by flashing firmware from edge branch
When looking for help, indicate what HW version you have and what FW version.
For example, I have TinyG HW version 7 with FW 0.96/Build 380.08 from master and am having good luck with tgFX Build 2404 EDGE on Win 32 as well as Putty from Linux.
BTW, you should see the motor LEDs turn off after about 10 secs or so after reboot.
This topic is from the original forum (November 2013). Your reply starts a new discussion linked to it.
Back to TinyG Support or latest activity.