Nergles

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 16, 2018 at 6:18 pm in reply to: Tinyg stops mid cut #11250
    Nergles
    Member

    Also, yes the spindle has a separate PSU.

    I am working through reading the link you posted. Definitely, some very good information there. Thank you for the Sunday support!

    December 16, 2018 at 5:56 pm in reply to: Tinyg stops mid cut #11248
    Nergles
    Member

    As I stated in the original post I do get a Flashing SpDIR light next to a solid PWM light.

    I used amazon to source some stepper wire motor .

    View post on imgur.com

    I recognize this might be the issue do you have a recommendation of wiring I should use?

    • This reply was modified 6 years, 3 months ago by Nergles.
    December 16, 2018 at 2:33 pm in reply to: Tinyg stops mid cut #11243
    Nergles
    Member

    you can see in this picture where it stopped. (Click on image to see both pictures)

    View post on imgur.com

    • This reply was modified 6 years, 3 months ago by Nergles.
    December 16, 2018 at 2:29 pm in reply to: Tinyg stops mid cut #11242
    Nergles
    Member

    I am about to lose my ever loving mind. I have yet to get a 100% successful cut out of this thing.

    It stopped mid cut again in the air. I made the change as requested loaded some stock in and got to cutting and then boom midway. Is there any way to recover the job once this happens?

    View post on imgur.com

    December 16, 2018 at 1:51 pm in reply to: Tinyg stops mid cut #11241
    Nergles
    Member

    Also on cnc.js my machine doesn’t 100% of the time set the x and y machine position. Stil seems to love but it just shows 0.00 in the location fields before I ever zero anything out.

    December 16, 2018 at 1:46 pm in reply to: Tinyg stops mid cut #11240
    Nergles
    Member

    Will that change require me to recalibrate all axis?

    December 14, 2018 at 12:23 pm in reply to: Tinyg stops mid cut #11230
    Nergles
    Member

    pastebin of my $$

    https://pastebin.com/krxELBU2

    it is a OX CNC with Nema 34 – 400w quite cut spindle if that is helpful at all.

    I’ll setup the machine to do a job without cutting and see how it goes this weekend.

    December 13, 2018 at 2:27 am in reply to: Tinyg stops mid cut #11225
    Nergles
    Member

    https://imgur.com/a/ychBAn1 ( picture of the console window of CNCjs.)

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)