Hi cmcgrath5035,
Many thanks for your detailed answer.
I have been reading the G2 and Tinyg wiki many more times, and as you suggested, I gained some more helpful knowledge.
That said, this newfound knowledge has still not really solved the issues that I’ve had.
I have compilied my own bin. file, trying with both master and edge branche, making a new custom settings_shapeoko2_”myname”.h file, just doing some minor changes from the original. I pointed to the settings_shapeoko2_”myname”.h in the make file, and compiled based on this.
Files compiled and flased without problems, but I still have issues running Chilipeppr.
I can connet to JSON and jog just fine. I can load a file and start running it just fine too, but then the problem starts.
X- and Y- axis are doing their thing, but Z-axis is just squealing (remember I can jog).
Have tried four different .nc files, checked settings file, wiring and tried adjusting current, which made no difference.
When the motor is squealing, I can easily turn it by hand, else it’s locked.
Any ideas?
Brgds
Stefan
