ictoamn

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 11, 2014 at 1:14 pm in reply to: G0 traverses exceed $x/y/zvm speed #6906
    ictoamn
    Member

    Hey Rhino,
    Yeah so far it seems nice. Before I did the default reset, things (mainly speeds) were all over the place. Now things are running smooth. I’m using Chilipeppr to run the machine.

    Right now I’m working on running the final wiring and mounting the limit switches. I ran your gcode on the Chilipeppr sim and it works fine. Once I have it all put back together I’ll try it on the machine.

    If you’re using TGFX I’d recommend trying Chilipeppr… It’s pretty nice.

    -Chris

    October 10, 2014 at 12:31 pm in reply to: G0 traverses exceed $x/y/zvm speed #6890
    ictoamn
    Member

    I am using a 24v unit.

    Ok, so it looks like resetting the default config has fixed whatever cause the problem. Looking at the default settings, I can tell that when I first got the TinyG it came with completely different settings. The xtm setting being as strange as it was and now after the defa=1 the xtm is 150mm. Maybe the config was corrupted when being loaded at manufacturing?

    Either way, thanks for the help guys.

    -Chris

    October 9, 2014 at 10:19 am in reply to: G0 traverses exceed $x/y/zvm speed #6879
    ictoamn
    Member

    Here’s a down traverse and back up to zero

    qr:31, qi:1, qo:0
    posz:-0.015,vel:32.93,stat:5
    posz:-0.189,vel:207.01
    posz:-0.830,vel:574.20
    posz:-2.206,vel:1068.18
    posz:-4.301,vel:1550.96
    posz:-7.258,vel:1958.51
    posz:-10.559,vel:2178.67
    posz:-14.255,vel:2240.23
    posz:-17.975,vel:2223.48
    posz:-21.395,vel:2085.02
    posz:-24.598,vel:1753.12
    posz:-27.005,vel:1302.10
    posz:-28.718,vel:786.97
    posz:-29.598,vel:369.11
    posz:-29.945,vel:93.63
    posz:-30.000,vel:3.04
    posz:-30.000,vel:0.00,stat:3
    qr:32, qi:0, qo:1
    qr:31, qi:1, qo:0
    posz:-29.982,vel:37.87,stat:5
    posz:-29.792,vel:221.08
    posz:-29.120,vel:596.71
    posz:-27.703,vel:1094.26
    posz:-25.568,vel:1574.64
    posz:-22.578,vel:1974.51
    posz:-19.260,vel:2185.39
    posz:-15.559,vel:2240.48
    posz:-11.840,vel:2220.14
    posz:-8.433,vel:2072.93
    posz:-5.258,vel:1732.00
    posz:-2.889,vel:1276.34
    posz:-1.218,vel:762.32
    posz:-0.345,vel:332.99
    posz:-0.048,vel:85.01
    posz:-0.000,vel:2.11
    posz:0.000,vel:0.00,stat:3
    qr:32, qi:0, qo:1

    I guess, I’ll reset to default and try setting everything again when I get home from work later.

    Thanks,
    Chris

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)