badassbiologist

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: TinyG Machine Status idle with Universal Gcode Sender #12047
    badassbiologist
    Participant

    That worked!

    Thank you for your help!

    in reply to: TinyG Machine Status idle with Universal Gcode Sender #12027
    badassbiologist
    Participant

    Yes, my issue is that the machine is moving, but the reported values are locked at 0.00. Any ideas what might cause this?

    in reply to: TinyG Machine Status idle with Universal Gcode Sender #12011
    badassbiologist
    Participant

    Reply #11997

    has an open link use that one instead.

    Thanks

    in reply to: TinyG Machine Status idle with Universal Gcode Sender #12010
    badassbiologist
    Participant

    >>> $$ output
    [ready] {“r”:{“fv”:0.970,”fb”:440.20,”hp”:1,”hv”:8,”id”:”3Y2462-PKY”,”msg”:”SYSTEM READY”},”f”:[1,0,0,5879]}
    >>> {ej:1}
    >>> {sr:{posx:t, posy:t, posz:t, mpox:t, mpoy:t, mpoz:t, plan:t, vel:t, unit:t, stat:t, dist:t, frmo:t, coor:t}}
    >>> {jv:4}
    >>> {qv:0}
    >>> {sv:1}
    >>> {sr:n}
    {“r”:{“ej”:1},”f”:[1,0,7,2003]}
    {“r”:{“sr”:{“posx”:0.000,”posy”:0.000,”posz”:0.000,”mpox”:0.000,”mpoy”:0.000,”mpoz”:0.000,”plan”:0,”vel”:0.00,”unit”:1,”stat”:1,”dist”:0,”frmo”:1,”coor”:1}},”f”:[1,0,109,1782]}
    {“r”:{“jv”:4},”f”:[1,0,7,7333]}
    {“r”:{“qv”:0},”f”:[1,0,7,8353]}
    {“r”:{“sv”:0},”f”:[1,0,4,1598]}
    >>> G21G91G1X-0.06F100
    >>> G90 G21
    {“r”:{},”f”:[1,0,19,78]}
    {“r”:{},”f”:[1,0,8,4401]}

    in reply to: TinyG Machine Status idle with Universal Gcode Sender #12000
    badassbiologist
    Participant

    Here is the work/machine position while actively toggling

    https://drive.google.com/file/d/1erEIU8N-w6on2RsvZ9a_btznlRC-5kI8/view?usp=sharing

    Any input is appreciated

    in reply to: TinyG Machine Status idle with Universal Gcode Sender #11999
    badassbiologist
    Participant

    **** Connected to COM7 @ 115200 baud ****
    [ready] {“r”:{“fv”:0.970,”fb”:440.20,”hp”:1,”hv”:8,”id”:”3Y2462-PKY”,”msg”:”SYSTEM READY”},”f”:[1,0,0,5879]}
    >>> {ej:1}
    >>> {sr:{posx:t, posy:t, posz:t, mpox:t, mpoy:t, mpoz:t, plan:t, vel:t, unit:t, stat:t, dist:t, frmo:t, coor:t}}
    >>> {jv:4}
    >>> {qv:0}
    >>> {sv:1}
    >>> {sr:n}
    {“r”:{“ej”:1},”f”:[1,0,7,2003]}
    {“r”:{“sr”:{“posx”:0.000,”posy”:0.000,”posz”:0.000,”mpox”:0.000,”mpoy”:0.000,”mpoz”:0.000,”plan”:0,”vel”:0.00,”unit”:1,”stat”:1,”dist”:0,”frmo”:1,”coor”:1}},”f”:[1,0,109,1782]}
    {“r”:{“jv”:4},”f”:[1,0,7,7333]}
    {“r”:{“qv”:0},”f”:[1,0,7,8353]}
    {“r”:{“err”:”{s”},”f”:[1,111,3,5694]}
    [ready] {“r”:{“fv”:0.970,”fb”:440.20,”hp”:1,”hv”:8,”id”:”3Y2462-PKY”,”msg”:”SYSTEM READY”},”f”:[1,0,0,5879]}
    >>> {ej:1}
    >>> {sr:{posx:t, posy:t, posz:t, mpox:t, mpoy:t, mpoz:t, plan:t, vel:t, unit:t, stat:t, dist:t, frmo:t, coor:t}}
    >>> {jv:4}
    >>> {qv:0}
    >>> {sv:1}
    >>> {sr:n}
    {“r”:{“ej”:1},”f”:[1,0,7,2003]}
    {“r”:{“sr”:{“posx”:0.000,”posy”:0.000,”posz”:0.000,”mpox”:0.000,”mpoy”:0.000,”mpoz”:0.000,”plan”:0,”vel”:0.00,”unit”:1,”stat”:1,”dist”:0,”frmo”:1,”coor”:1}},”f”:[1,0,109,1782]}
    {“r”:{“jv”:4},”f”:[1,0,7,7333]}
    {“r”:{“qv”:0},”f”:[1,0,7,8353]}
    {“r”:{“err”:”{s”},”f”:[1,111,3,5694]}
    >>> G21G91G1Y0.06F100
    >>> G90 G21
    {“r”:{},”f”:[1,0,18,77]}
    {“r”:{},”f”:[1,0,8,4401]}

    in reply to: TinyG Machine Status idle with Universal Gcode Sender #11998
    badassbiologist
    Participant

    The work/machine position worked when I initially integrated the tinyG. However, it stopped tracking at some point since then and most recently I successfully flashed the latest firmware on github. Are there firmware values that should be changed?

    in reply to: TinyG Machine Status idle with Universal Gcode Sender #11997
    badassbiologist
    Participant

    Here is the work/machine position I need to work with tinyG
    https://drive.google.com/file/d/1BffVLdAjP8fNdcXm2JMX22ac6YjL639L/view?usp=sharing

    in reply to: TinyG Machine Status idle with Universal Gcode Sender #11996
    badassbiologist
    Participant

    test

Viewing 9 posts - 1 through 9 (of 9 total)