ajbonu02

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 15, 2018 at 11:50 am in reply to: tinyG won't connect on MacOSX #11052
    ajbonu02
    Member

    Thank you for the response. I will give those a try and get back to you with the results. Thanks

    July 9, 2018 at 11:14 pm in reply to: tinyG won't connect on MacOSX #11049
    ajbonu02
    Member

    OK, used the dmesg as indicated, and am not seeing anything. I went through and removed the ftid driver (v 2.3), and reinstalled, with no luck. I also checked the dev directory (per FTDI’s installation instructions), and did not see the the serial port.

    I also switched out the usb cable, and tried a two different usb ports on my mac.

    Anything else I can try?

    July 9, 2018 at 10:11 pm in reply to: tinyG won't connect on MacOSX #11048
    ajbonu02
    Member

    Thank you. I will trying doing the DMESG equivalent on the mac.

    On start-up, the SpDir led blinks about 12 times, and then the PWM light turns on and stays red. The tx/rx leds do not turn on at all. Does that mean it is not booting up properly?

    July 8, 2018 at 4:36 pm in reply to: tinyG won't connect on MacOSX #11046
    ajbonu02
    Member

    Forgot to add: board is v8

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)