TinyG V8 – User-accessible flash?

Home › Forums › TinyG › TinyG Support › TinyG V8 – User-accessible flash?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 3, 2022 at 12:06 pm #12130
    jimtellier
    Member

    I’m pretty familiar with the TinyG command repertoire, but I don’t see any “documented” feature allowing user data read/write of flash. I recently found what I think is a viable use-case for this; the size requirement would be small, conceptually equivalent to a “cookie”. Any thoughts?

    March 3, 2022 at 3:24 pm #12131
    cmcgrath5035
    Moderator

    I’ll assume you have looked thru the wiki information at https://github.com/synthetos/TinyG/wiki . I have not seen anyone try this, either using onboard flash or On-board EEPROM.
    If there is help the be had, it would be available at https://github.com/synthetos/TinyG/issues where you can ask your questions and hope a developer or customizer like yourself stops by and shares ideas.

    Good luck with your project

    March 4, 2022 at 11:47 am #12132
    jimtellier
    Member

    Yes, I’ve looked thru the Wiki docs (many times :), but unless I’m missing it, I don’t see anything re: flash/eeprom. I’ll post under Issues as you suggest. Thanks!
    Jim

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.