TinyG 440.15

Home › Forums › TinyG › TinyG Support › TinyG 440.15

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 9, 2015 at 7:45 am #7955
    gwandad
    Member

    I am testing my TinyG OX with ChiliPeppr in inch mode. I receive the following message in ChiliPeppr
    “You are running firmware build 440.14. You should be running firmware 440.15 at a minimum for ChiliPeppr to function correctly. Visit http://synthetos.github.io/ to get the latest firmware.
    Firmware “above” the Synthetos “edge” release is sometimes available via http://DanalEstes.github.io/TinyG”
    The instructions suggeste I start a Topic here. I have downloaded 440.15, but have not installed it yet.I presume there is no problem reinstalling 440.14 if needed?

    July 9, 2015 at 9:14 am #7957
    cmcgrath5035
    Moderator

    The 440.15 fw supports an updated (new features) Chilipeppr widget which significantly enhances the use of multiple coordinate systems. The creation of this new widget found a bug in 440.14 that is corrected in 440.15.

    440.15 was created and is supported by Danal, has been tested and works for those who have tested it so far. If you upgrade to 440.15 and don’t like it, yes, you could reinstall 440.14 from Synthetos.

    You do have the option to run CP with 440.14. Unfortunately, I can’t be explicit as to the specific case where the bug (fixed in 440.15) will nip you.
    I’ll ask Danal to address that, in this thread:

    July 9, 2015 at 5:53 pm #7965
    cmcgrath5035
    Moderator

    Review the Chilipeppr group posting above frequently, Danal added a lot of clarity to what does/does not work well if you stay with 440.14.

    If you are the adventuresome type, the multi-Coordinate system support enabled by 440.15 looks real neat.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.