Read out status of Coolant

Home › Forums › TinyG › TinyG Support › Read out status of Coolant

Tagged: , , ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 19, 2016 at 4:20 am #9361
    lightlapreset
    Member

    Short question with short answer (I hope): Is there a possibility to read out the status of the coolant on tinyg v8 through a gcode command? If the coolant is ON or OFF?
    We are using the 3.3v output to control a brake for the z-axis and don’t want the motor to work against the drag.

    Thanks!

    February 19, 2016 at 9:37 am #9364
    cmcgrath5035
    Moderator

    Short Answer (all I have time for at the moment, but good question)
    1. Review all the wili write ups on status reports, start with this one

    2. If that does not get you an answer, post a question here:

    while you are in the issues area, look around at open and closed threads, may have been answered but not made it to the wiki yet.

    If you do solve this, please report here for future lookers.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.