Awesome! Just ran your avrdude method. Worked perfectly. Here’s my cmd output. Verified it with $$ and 440.16 is now installed. Thanks for the help.
C:\flash_tinyg>avrdude -p x192a3 -c avr109 -b 115200 -P COM4 -e -U flash:w:tinyg
-master-440.16.hex
Connecting to programmer: .
Found programmer: Id = “XBoot++”; type = S
Software Version = 1.7; No Hardware Version given.
Programmer supports auto addr increment.
Programmer supports buffered memory access with buffersize=512 bytes.
Programmer supports the following devices:
Device code: 0x7b
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% -0.00s
avrdude: Device signature = 0x1e9744
avrdude: erasing chip
avrdude: reading input file “tinyg-master-440.16.hex”
avrdude: input file tinyg-master-440.16.hex auto detected as Intel Hex
avrdude: writing flash (119014 bytes):
Writing | ################################################## | 100% 18.63s
avrdude: 119014 bytes of flash written
avrdude: verifying flash memory against tinyg-master-440.16.hex:
avrdude: load data flash data from input file tinyg-master-440.16.hex:
avrdude: input file tinyg-master-440.16.hex auto detected as Intel Hex
avrdude: input file tinyg-master-440.16.hex contains 119014 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 17.75s
avrdude: verifying …
avrdude: 119014 bytes of flash verified
avrdude done. Thank you.
.
