Hardware layout drawings

Home › Forums › TinyG › TinyG Support › Hardware layout drawings

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 23, 2016 at 10:55 am #9977
    Keith-W
    Member

    Are there drawing available for the PCB? I was laying out a panel for this board and have already drawn most of it but was starting to add more detail and thought I would check/ask. Did not see anything under the hardware section. Prefer to have dxf but can likely convert any format. I realize this is not an “issue” but rather a request. Thanks!

    October 23, 2016 at 9:25 pm #9979
    cmcgrath5035
    Moderator

    Not that I know of – I made my own with calipers, but for a V7 and a V9K, so neither would be of help to you.

    October 27, 2016 at 8:58 pm #9988
    Keith-W
    Member

    I hope someone decides to make them available at some point. I’ve drawn mine already but it is duplicated effort any time anyone has to do this.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.