Female motor connector source for V7 board?

[pat19087]

I’ve got a V7 board and need fresh wiring for my steppers.

The board has four sets of header pins, and this seems to be a source for the board side:
http://www.digikey.ca/product-detail/en/0026604040/WM4622-ND/197447

But digikey doesn’t have the female side to put on the cables.

I don’t see a spec for the parts in the wiki, it may be there with me just not finding it.

I need to order four connectors for my four motors.

[pat19087]

This part looks close, but I can’t tell if its really right.
http://www.digikey.com/product-detail/en/0009503041/WM2102-ND/26457

Confirmation of this as “good enough” would be greatly appreciated.

[pat19087]

Here are the parts

You need four of these holders:
http://www.mouser.com/Search/ProductDetail.aspx?R=09-50-3041virtualkey53810000virtualkey538-09-50-3041

and 16 of these pins/connectors:
http://www.mouser.com/Search/ProductDetail.aspx?R=08-50-0134virtualkey53810000virtualkey538-08-50-0134

They are cheap, you can get all you want for under $5.

[alden]

Thanks Pat. Sorry you had to find these on your own. They are now up on the wiki. I need to organize the HW section, but it’s a start.
https://github.com/synthetos/TinyG/wiki/TinyG-Hardware-Information

• This reply was modified 10 years, 9 months ago by alden.

[Author]

Posts