Arc specification errors?

I’ve just started trying to run my first job on a Shapeoko with Tinyg.  I’ve tried a couple different Gcode files off the Shapeoko wiki and I keep running into Arc Specification errors.  Does anyone have ideas on what I should try to resolve this?  I’ll post my Configuration which I copied from the Shapeoko tinyg wiki page.  Thanks for any help.

 

[fb]  firmware_build            339.09

[fv]  firmware_version            0.94

[si]  status_interval             0 ms [0=off]

[gpl] gcode_select_plane          0 [0,1,2]

[gun] gcode_units_mode            0 [0,1]

[gco] gcode_coord_system          1 [1-6]

[gpa] gcode_path_control          2 [0,1,2]

[gdi] gcode_distance_mode         0 [0,1]

[ea]  enable_acceleration         1 [0,1]

[ja]  junction_acceleration    7874 in

[ml]  min_line_segment            0.003 in

[ma]  min_arc_segment             0.004 in

[mt]  min_segment_time         5000 uSec

[ic]  ignore CR or LF on RX       0 [0,1=CR,2=LF]

[ec]  enable_CR (on TX)           0 [0,1]

[ee]  enable_echo                 1 [0,1]

[ex]  enable_xon_xoff             1 [0,1]

[eh]  enable_hashcode             1 [0,1]

[g54x] g54_x_offset               0.000 in

[g54y] g54_y_offset               0.000 in

[g54z] g54_z_offset               0.000 in

[g54a] g54_a_offset               0.000 in

[g54b] g54_b_offset               0.000 in

[g54c] g54_c_offset               0.000 in

[g55x] g55_x_offset               0.000 in

[g55y] g55_y_offset               0.000 in

[g55z] g55_z_offset               0.000 in

[g55a] g55_a_offset               0.000 in

[g55b] g55_b_offset               0.000 in

[g55c] g55_c_offset               0.000 in

[g56x] g56_x_offset               0.000 in

[g56y] g56_y_offset               0.000 in

[g56z] g56_z_offset               0.000 in

[g56a] g56_a_offset               0.000 in

[g56b] g56_b_offset               0.000 in

[g56c] g56_c_offset               0.000 in

[g57x] g57_x_offset               0.000 in

[g57y] g57_y_offset               0.000 in

[g57z] g57_z_offset               0.000 in

[g57a] g57_a_offset               0.000 in

[g57b] g57_b_offset               0.000 in

[g57c] g57_c_offset               0.000 in

[g58x] g58_x_offset               0.000 in

[g58y] g58_y_offset               0.000 in

[g58z] g58_z_offset               0.000 in

[g58a] g58_a_offset               0.000 in

[g58b] g58_b_offset               0.000 in

[g58c] g58_c_offset               0.000 in

[g59x] g59_x_offset               0.000 in

[g59y] g59_y_offset               0.000 in

[g59z] g59_z_offset               0.000 in

[g59a] g59_a_offset               0.000 in

[g59b] g59_b_offset               0.000 in

[g59c] g59_c_offset               0.000 in

X origin offset:     0.000 in

Y origin offset:     0.000 in

Z origin offset:     0.000 in

A origin offset:     0.000 deg

B origin offset:     0.000 deg

C origin offset:     0.000 deg

[1ma] m1_map_to_axis              0 [0=X, 1=Y…]

[1sa] m1_step_angle               1.800 deg

[1tr] m1_travel_per_revolution    1.358 in

[1mi] m1_microsteps               8 [1,2,4,8]

[1po] m1_polarity                 1 [0,1]

[1pm] m1_power_management         1 [0,1]

[2ma] m2_map_to_axis              1 [0=X, 1=Y…]

[2sa] m2_step_angle               1.800 deg

[2tr] m2_travel_per_revolution    1.358 in

[2mi] m2_microsteps               8 [1,2,4,8]

[2po] m2_polarity                 1 [0,1]

[2pm] m2_power_management         1 [0,1]

[3ma] m3_map_to_axis              2 [0=X, 1=Y…]

[3sa] m3_step_angle               1.800 deg

[3tr] m3_travel_per_revolution    0.049 in

[3mi] m3_microsteps               8 [1,2,4,8]

[3po] m3_polarity                 0 [0,1]

[3pm] m3_power_management         1 [0,1]

[4ma] m4_map_to_axis              3 [0=X, 1=Y…]

[4sa] m4_step_angle               1.800 deg

[4tr] m4_travel_per_revolution    0.049 in

[4mi] m4_microsteps               8 [1,2,4,8]

[4po] m4_polarity                 0 [0,1]

[4pm] m4_power_management         0 [0,1]

[xam] x_axis_mode                 1 [standard]

[xvm] x_velocity_maximum        629.921 in/min

[xfr] x_feedrate_maximum         23.622 in/min

[xtm] x_travel_maximum            6.693 in

[xjm] x_jerk_maximum      196850400 in/min^3

[xjd] x_junction_deviation        0.0020 in (larger is faster)

[xsm] x_switch_mode               1 [0,1,2,3,4]

[xsv] x_search_velocity         -39.370 in/min

[xlv] x_latch_velocity            3.937 in/min

[xlb] x_latch_backoff             0.079 in

[xzb] x_zero_backoff              0.039 in

[yam] y_axis_mode                 1 [standard]

[yvm] y_velocity_maximum        629.921 in/min

[yfr] y_feedrate_maximum        629.921 in/min

[ytm] y_travel_maximum            6.693 in

[yjm] y_jerk_maximum      196850400 in/min^3

[yjd] y_junction_deviation        0.0020 in (larger is faster)

[ysm] y_switch_mode               1 [0,1,2,3,4]

[ysv] y_search_velocity         -39.370 in/min

[ylv] y_latch_velocity            3.937 in/min

[ylb] y_latch_backoff             0.079 in

[yzb] y_zero_backoff              0.039 in

[zam] z_axis_mode                 1 [standard]

[zvm] z_velocity_maximum         47.244 in/min

[zfr] z_feedrate_maximum         47.244 in/min

[ztm] z_travel_maximum            1.969 in

[zjm] z_jerk_maximum        1968504 in/min^3

[zjd] z_junction_deviation        0.0020 in (larger is faster)

[zsm] z_switch_mode               1 [0,1,2,3,4]

[zsv] z_search_velocity         -15.748 in/min

[zlv] z_latch_velocity            3.937 in/min

[zlb] z_latch_backoff             0.079 in

[zzb] z_zero_backoff              0.039 in

[aam] a_axis_mode                 0 [disabled]

[avm] a_velocity_maximum       3600.000 deg/min

[afr] a_feedrate_maximum       3600.000 deg/min

[atm] a_travel_maximum           -1.000 deg

[ajm] a_jerk_maximum       20000000 deg/min^3

[ajd] a_junction_deviation        0.0500 deg

[ara] a_radius_value              1.0000 deg

[asm] a_switch_mode               1 [0,1,2,3,4]

[asv] a_search_velocity        -600.000 deg/min

[alv] a_latch_velocity          100.000 deg/min

[alb] a_latch_backoff            -5.000 deg

[azb] a_zero_backoff              2.000 deg

[bam] b_axis_mode                 0 [disabled]

[bvm] b_velocity_maximum       3600.000 deg/min

[bfr] b_feedrate_maximum       3600.000 deg/min

[btm] b_travel_maximum           -1.000 deg

[bjm] b_jerk_maximum       20000000 deg/min^3

[bjd] b_junction_deviation        0.0500 deg

[bra] b_radius_value              1.0000 deg

[bsm] b_switch_mode               1 [0,1,2,3,4]

[bsv] b_search_velocity        -600.000 deg/min

[blv] b_latch_velocity          100.000 deg/min

[blb] b_latch_backoff            -5.000 deg

[bzb] b_zero_backoff              2.000 deg

[cam] c_axis_mode                 0 [disabled]

[cvm] c_velocity_maximum       3600.000 deg/min

[cfr] c_feedrate_maximum       3600.000 deg/min

[ctm] c_travel_maximum           -1.000 deg

[cjm] c_jerk_maximum       20000000 deg/min^3

[cjd] c_junction_deviation        0.0500 deg

[cra] c_radius_value              1.0000 deg

[csm] c_switch_mode               1 [0,1,2,3,4]

[csv] c_search_velocity        -600.000 deg/min

[clv] c_latch_velocity          100.000 deg/min

[clb] c_latch_backoff            -5.000 deg

[czb] c_zero_backoff              2.000 deg