com port

Home › Forums › TinyG › TinyG Support › com port

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 30, 2015 at 11:26 am #9043
    ekimwa
    Member

    I connect to the json server thru com port 5, but this morning com port 5 does not connect. Any ideas on where to start looking for this problem?

    November 30, 2015 at 11:47 am #9046
    cmcgrath5035
    Moderator

    So, you are a Windows user. 7,8,8.1,10, other?
    TinyG or TinyG2?

    When you plug tinyG into your computer, do you get the beep/pop-up that a new device has been attached.

    If you look in control panel-Devices and Printers, or in Device Manager, does tinyG appear anyway and does Windows report “driver OK” or something like that?

    SPJS (version = 1.86 or?) also running on Windows.
    Just to be precise, the Chilipeppr browser connects to SPJS via a web socket,
    SPJS connects to tinyG over a COMx port

    November 30, 2015 at 11:59 am #9047
    ekimwa
    Member

    using windows 7, TinyG. It stays plugged in all the time. Have unplugged, and re-plugged back in to no avail. Went to devivice manager and only shows com1. I’m not computer literate, so can I and how do I switch tinyg over to com 1

    December 1, 2015 at 8:21 am #9055
    cmcgrath5035
    Moderator

    From your description, I doubt tinyG is COM1.
    If you remove the tinyG USB from the PC, does COM1 disappear from device manager?

    How do you start SPJS, from the CMD line?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.