v6 Pots

Home › Forums › TinyG › TinyG Support › v6 Pots

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 11, 2013 at 4:03 pm #3998
    minorthreat
    Member

    I finally broke a pot, poor little guy.

     

    Anybody have the part number handy? Is there anything more robust in the same foot print?

    April 11, 2013 at 4:25 pm #3999
    alden
    Member

    Sorry about the pot. You see we big bigger ones on the V7s.
    The part number is: Murata PVG3G502C01R00
    http://www.mouser.com/ProductDetail/Murata/PVG3G502C01R00/?qs=%2fha2pyFadujnuS%2ft7JadhCuZJcqCPg4UcIYXtdCnkEtP24rXvClytw%3d%3d

    April 11, 2013 at 8:20 pm #4000
    minorthreat
    Member

    Thanks! No worries, I manhandled it after upgrading my heatsinks… weird failure mode though, the pot failed closed so it limits the axis to super low current. I’d keep that in mind for debugging anyone who isn’t moving.

    April 12, 2013 at 11:36 am #4001
    alden
    Member

    I see. So the current is very lo. I’ll add this to the troubleshooting wiki. Thanks for the tip.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.