Probing/Auto Level Not Working

Home Forums g2Core Hardware Support Probing/Auto Level Not Working

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #11775

    Greetings,
    I’ve checked a number of places now and I cannot seem to find any information on using autolevel or probe in g2core. I read somewhere (forgot already) that the probe pin is 18 (Zmin). I wired it up and changed the Zmin function to limit only but every time I probe I just fault the controller. I tried changing it to homing only as well as homing and limit, but I never get a result. I’ve now spent hours on what should have taken 15 minutes and I have no idea why this feature is not working.

    Is pin 18 on the Due even the right pin? Is there some setting that I need to change for probing to work properly?

    #11809
    cmcgrath5035
    Moderator

    Woa, sorry, I depend on notifications when issues show up and somehow it got turned off.

    G2core Probing – Have you seen this wiki item https://github.com/synthetos/g2/wiki/Gcode-Probes#configuring-probe-input

    It answers some of your questions and a lot more.

    Are you probiing directly from CLI, or using a CAM interface such as Chilipeppr or cnc.js?

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.